Addonics Technologies DDU7SAS Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Duplikator Disk Addonics Technologies DDU7SAS. Addonics Technologies DDU7SAS 10 halaman. 1:7 blu-ray / dvd duplicator

Halaman Cetak

To select any function from #1 to # 13 as the first item appears on the screen whenever system is

turned on.

12.6 Auto Verify

To set if auto verify target disc's readability after copy function. The default is Off. Press ▼ to select On.

12.7 Auto Compare

To set if auto do comparison after copy function to check if source and target disc are identical.

The default is Off. Press ▼ to select On.

12.8 Auto Prescan

To set if auto scan source disc before copy function. The default is Off. Press ▼ to select On.

12.9 Eject Disc

There are 3 kinds of tray behavior when copy process is completed.

Eject Good Only: Only good disc will be ejected after burning.

Eject All Disc : All discs will be ejected after burning.

Do Not Eject : All discs stay in after burning.

The default is Eject Good Only.

12.10 Burn On The Fly

Burn On The Fly means data will be copied directly from the source disc to the target disc. When

the setting is Off, the data will be loaded into temporary partition of HDD first, then copy from HDD

to disc. The default is On. Press ▼ to select Off.

12.11 Burn Mode

There are two modes: DAO (Disc At Once) and TAO (Track At Once). The default is DAO. Press ▼ to

select TAO.

12.12 Display Time

To set if display a timer while copying. The default is On. Press ▼ to select Off.

12.13 Button Sound

To enable or disable beep sound while press a key.

12.14 Device Info

To show the writer information.

12.15 System Info

To show system Information.

12.16 Quick Erase

To erase data on the DVD rewriteable discs quickly.

12.17 Full Erase

To erase data on the DVD rewriteable discs completely. Compared with Quick Erase, Full Erase

takes longer time to do the job.

12.18 Auto Close Tray

All tray will be closed in selected time and if disc is ready, system will auto start copy, test or both

functions, depends on which function is stay on the LCD screen.

The default is Off, press ▼ to select 1 Byte, 1 KB, 10 KB, 100KB, 1 MB, 10MB, 100MB etc.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/