CONTACLIP RK 95 Ex BG Buku Petunjuk - Halaman 3

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Industri CONTACLIP RK 95 Ex BG. CONTACLIP RK 95 Ex BG 5 halaman. Connection of aluminum wires to screw connection terminal blocks

Halaman Cetak

Connection of aluminum wires to screw connection terminal blocks

_______________________________________________________________________

Manufacturer:

Address:

Products:

For the connection of aluminum wires to HSK and HSKG series stud terminals, corresponding AL / CU compression cable lugs

in ring form that are suitable for the connection of aluminum wires must generally be pressed onto the wire ends.

Screw connection terminal blocks (SRK, SSL, RK, SL, TKS, SDK) allow a direct one-sided or double-sided connection of round

solid (RE) or sector-shaped solid (SE) aluminum wires taking into account the restrictions listed in this document.

General note:

A problematic connection is generally the connection in humid environments as it can easily lead to excessive oxidation

of the aluminium. In this case, the use of suitable AL / CU press connectors with CU bolts for contacting is imperative even

when using solid aluminum wires in order to ensure reliable contacting over a long period of time.

Example:

The terminals are installed in the outer cabinets of solar systems or wind turbines, which have large temperature

fluctuations during the year due to the installation site and surroundings. Therefor under certain circumstances,

condensation can form in the control cabinet or housing.

The following restrictions apply to the direct connection of the conductors in normal environments:

The wire / terminal combination used must be a combination corresponding to the table below.

"Qualified combinations of screw-connection terminal blocks with aluminum wires"

The aluminum conductors used must be solid, round (RE) or solid, sector-shaped (SE).

For all other types of multi-wire aluminum conductors, appropriate AL / CU compression joints must be used to connect the

conductor in the terminal blocks.

CONTA-CLIP Verbindungstechnik GmbH, Otto-Hahn-Straße 7, 33161 Hövelhof, Telefon +49 (0)5257 9833 0 Telefax +49 (0) 5257 9833 33

CONTA-CLIP Verbindungstechnik GmbH

33161 Hövelhof

Otto-Hahn-Straße 7

Terminal blocks with screw connection: SRK, SSL, RK, SL, TKS, SDK

Stud terminals HSK, HSKG

Version: 20.05.2020