Contacta HLD4 Instalasi & Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Instalasi & Panduan Pengguna untuk Alat Bantu Dengar Contacta HLD4. Contacta HLD4 20 halaman. Hearing loop driver
Halaman CetakHLD4 Hearing Loop Driver
1.
Place the driver in a convenient and well ventilated area near to
the TV or other audio source. Ensure all necessary connection
leads can reach the relevant device.
Option 1:
Installing the Hearing Loop Cable
1.
Run the loop cable around the room starting
and ending at the hearing loop driver. The
cable may be tucked under the edge of the
carpet, or fixed to either a picture / dado rail
or skirting board with the clips provided.
2. Where the cable passes a door or other obstacle, ideally tuck it
under the carpet or fix the cable around the frame if tucking under
the carpet isn't possible. For best performance the cable should
stay on the same plane.
3. The cable only has to go around the area to be looped.
•
Excess loop wire may be cut off, provided a MINIMUM of 11 metres
(35 feet) is left connected to the hearing loop driver. DO NOT leave
spare cable coiled on the drum.
Option 2:
Installing the Hearing Loop Pad
1.
Place the loop pad in a suitable
position on the chair to be used for
listening, either on the chair back or
under the seating area.
2. Lay the connecting lead from the Pad
10