Contacta HLD7 Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Bantu Dengar Contacta HLD7. Contacta HLD7 16 halaman. Hearing loop driver
Juga untuk Contacta HLD7: Panduan Pengguna (20 halaman)
Halaman Cetak
4
Contacta
|
HLD7
Basic Adjustment mode
MIC
While in Adjustment mode
Pressing the MIC + or - will
adjust the MIC input gain,
adjustments are in 1dB steps.
LEDs show the MIC's level
after fader.
Signal Level for inputs should be set to have peak signal
level occasionally illuminating first amber LED.
Back to contents
LINE
CLIP
ACTIVE
PHTM
While in Adjustment mode
Pressing the LINE + or - will
adjust the LINE input gain,
adjustments are in 1dB steps.
LEDs show the LINE level
after fader. If input is low the
LOW SIG LED will illuminate.
CLIP
PERIMETER
ACTIVE
MASTER
LOW SIG
SLAVE
DRIVE
STATUS
POWER
While in Adjustment mode
Pressing the Drive + or - will
adjust the Drive output by
1dB steps.
LEDs show the DRIVE level in
approx 0.5A increments.