DURASONIC DS20L Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembersih Perhiasan Ultrasonik DURASONIC DS20L. DURASONIC DS20L 17 halaman. Ultrasonic cleaners

Halaman Cetak

Problem

Cleaner operates but does not

maintain set temperature.

Cleaner operates but display does

not

function.

Decreased ultrasonic activity.

Service Information

With normal use, your Ultrasonic Cleaner should not require servicing. However, if it

fails to operate satisfactorily, first try to diagnose the problem by following the

suggestions in the Troubleshooting Guide.

If you find that your cleaner needs repair, carefully pack and return it to Sharpertek. If

under warranty, remember to include proof of purchase.

Your cleaner will be shipped by ground service unless you specify otherwise.

High voltage inside - dangerous shock hazard.

DO NOT attempt to disassemble or repair the cleaner.

Cause

Malfunctioning heater or

sensor

Interrupted calibration

sequence.

Timer board

Bad touchpad panel.

Solution is not

Solution is spent.

Solution level is incorrect for

load.

Tank bottom is covered with

soil

particles.

Using deionized water in the

tank.

High voltage inside the cleaner is dangerous.

Warning

components.

malfunctions.

Make sure that tank was filled with warm

degassed.

tap water plus cleaning solution and has

run 5-10 minutes.

Change

Adjust solution to within 1 ½" from top of

tank, filled with warm tap

Empty,

Wipe with a nonabrasive

Deionized water does not cavitate as

actively as soapy tap

Warning

What to do

Call nearest authorized service

Press SET DISPLAY.

Call nearest authorized service

solution.

water.

then clean tank with warm

cloth.

water.

center.

water.