Contacta STS-K001L Instalasi & Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Instalasi & Panduan Pengguna untuk Sistem interkom Contacta STS-K001L. Contacta STS-K001L 16 halaman. Window intercom system bridge bar kit

Halaman Cetak

1. Ensure the customer/visitor and staff volumes are turned down.

2. Adjust staff (Volume In) volume to a comfortable level. Press and hold

the Volume In (+) or (-) buttons to increase or decrease the level. The

corresponding LED bar will show the volume setting.

3. Raise customer/visitor (Volume Out) volume until feedback is heard. Press

and hold the Volume Out (+) or (-) buttons to increase or decrease the

level. The corresponding LED bar will show the volume setting.

4. Lower customer/visitor (Volume Out) volume until feedback is eliminated.

Setup Area 2 allows you to adjust the Ducking level or to turn it on/off.

The ducking function is provided to reduce feedback on a window intercom

system. Feedback occurs when the overall setting of both volume controls

is too high. The ducking system works by detecting which microphone in the

conversation is being used, and temporarily reducing the volume setting.

Increase

ducking level

Decrease

ducking level

Setup Area 3 allows you to adjust the Hearing Loop Drive or to turn it on/off.

Hearing loops improve communication by enabling hearing device users to

hear sound sources directly, cutting out background noise.

Increase drive

Decrease drive

The drive levels should be adjusted so the red LED 8 is illuminated only when

Ducking Adjustment (LED 2 flashes)

Hearing Loop Drive Adjustment (LED 3 flashes)

Setup Area 2:

Setup Area 3:

Ducking on

Ducking off

Hearing Loop Drive on

Hearing Loop Drive off