Contacta STS-K001L Instalasi & Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Instalasi & Panduan Pengguna untuk Sistem interkom Contacta STS-K001L. Contacta STS-K001L 16 halaman. Window intercom system bridge bar kit

Halaman Cetak

Speaker & Microphone Kit Installation

Staff Side Installation

1. Place the staff microphone on the staff side of the counter top, ensuring

that it does not cause an obstruction and is as close to staff as possible.

2. Place the amplifier under the staff counter, ensuring that it will not

obstruct staff when they are sitting.

3. Mark the four fixing points for the amplifier under the counter.

4. Drill and fix the amplifier in place using the supplied screws.

5. Use a cable management hole to run the staff microphone cable back to

the amplifier. If there is not already a cable management hole, drill in a

suitable location near the rear of the surface.

6. Install the amplifier's power supply close to a power socket outlet using

the supplied mounting bracket and fixing screws.

Fixing points