Addonics Technologies HDUSAS Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Duplikator Disk Addonics Technologies HDUSAS. Addonics Technologies HDUSAS 8 halaman.

1. Copy

Make sure that the capacity of the target is equal or larger than the source.

Copies data directly from the source to the target.

Choose option 1 from the menu and press ENT to begin copying. The system will

auto detect the source/target and display info about the copying process. Once

the copying process is complete, the LCD will display Copy OK.

2. Compare

Compare is used to see if the data on the source is identical to the target after the

copy operation.

Choose option 2 and press ENT to begin comparison. The LCD will display

comparison progress info and once complete will display information about how

many comparisons were OK, how many failed and how many were different.

3. PreScan Source

PreScan is used to check if the source can be accessed properly. It also tests the

read speed of the source.

Choose option 3 and press ENT to begin scanning. The LCD will display scan

progress info and read speed. Once the scan is complete, the LCD will display

PreScan Ok.

ReScan Bus allows swapping the source or target in and out without having to

reboot the system.

Choose option 4 and press ENT to begin rescanning. The system will rescan the

source without the need to reboot.

Source Size is used to show the capacity of the source.

Choose option 5 and press ENT. The LCD will display the capacity of the source.

6. Setup

Setup allows various system settings to be changed. There are 8 sub-options:

Language, Copy Size, Startup Menu, Auto Compare, Copy with Size, Button

Sound, Device Info and System Info.

Choose option 6 and the LCD will display the first option of the subfunctions.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/