Contacta IR-RX2-DC1 Instalasi & Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Instalasi & Panduan Pengguna untuk Pengisi Daya Baterai Contacta IR-RX2-DC1. Contacta IR-RX2-DC1 4 halaman. Single-bay infrared receiver/hearing loop listener charger

Halaman Cetak

General information:

Thank you for your purchase of the single-bay charger.

Please read through the operating instructions carefully to be able to set up the unit

correctly and to prevent damage to the rechargeable batteries within the receiver.

Included in the standard package:

Please check if all of the following components are included:

- Single bay charger

- Power supply unit

- Manual

If any parts are missing, please immediately contact your dealer or the

manufacturer directly.

Function:

This charger is able to recharge the batteries of a single bay infrared receiver/

hearing loop listener charger.

Setup

Place the single bay charger in a dry and ventilated position. First connect the power

supply unit with the charger, then plug it into a electrical mains outlet.

Charging the receivers:

When a receiver is placed into the charging bay, the control lamp lights up in red. After

the receiver is fully charged, the control lamp will display a green light. It may take up

to several hours until a receiver is fully charged.

The control lamp switches off when the receiver is removed from the bay.

Warranty

Should a malfunction occur despite the unit having been set up and operated correct-

ly, please contact your dealer or the manufacturer directly.

This warranty covers the repair of the product and returning it to you free of charge.

The warranty does not apply to damage caused by incorrect handling or attempts to

repair the unit by people not authorised to do so (destruction of the seal on the unit).

Repairs will only be carried out under warranty if the completed warranty card is retur-

ned accompanied by a copy of the dealer's in voice/till receipt.

Always specify the product number in any event.

2 English