DAPAudio K-112 Petunjuk Manual - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Pembicara DAPAudio K-112. DAPAudio K-112 9 halaman.

Description of the device

Features

The K-112 is a 12" 2-way Fullrange speakersystem:

• 12/1 passive plastic vented PA speaker system

• Woofer:

• High Driver:

• Nominal Impedance:

• Power Handling:

• Freq. Response (-3 dB):

• Freq. Range (-10 dB):

• Sensitivity (Full Space):

• Peak SPL at 1m (Theoretical):

• Nominal Dispersion (HxV):

Overview

Remove all packing materials from the K-112. Check that all foam and plastic padding is removed.

Connect all cables.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 240V power, or vice versa.

Do not supply power before

12", 8 Ohm

63 mm Voice Coil

1.375" Titanium

Dome, 8 Ohm,

34 mm Voice Coil

8 Ohm

225 Watt Continuous

450 Watt Program

900 Watt Peak

75 – 15.000 Hz

60 – 18.000 Hz

96 dB / W / m

125.5 dB

65° x 65°

all components of the system are

set up and connected properly.

Fig. 1