DAPAudio Soundmate Easy Panduan Produk - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Produk untuk Pembicara DAPAudio Soundmate Easy. DAPAudio Soundmate Easy 11 halaman.

Description of the device

Features

Soundmate Easy is a complete sound reinforcement solution consisting of:

• 2 mid/high satellite speakers 6,5" 60 Watt / 4 Ohm

• 1 active subwoofer 10" 150 watt / 4 Ohm, equipped with amplifier(s) and all the electronics required to run

the system.

• electronic circuitry has been fine tuned to match the speaker systems

• 2 x 6 m Speakon – cable

• 2 adjustable speakerstands

• 1 carrying bag for speakerstands and cables

• plug and play

Overview

1) Subwoofer Gain Control: Controls the levels of incoming signal to the subwoofer.

2) Balance: To adjust the relative volume between the left and the right channel.

3) Ground/Lift: Remove ground from circuit to eliminate hum caused by ground loops.

4) LED Indicator:

5) Gain Mic: Controls the levels of input signals from the microphone.

6) Gain Line: Controls the level of LINE-IN signals to avoid distortion.

7) Gain Aux: Controls the level of the AUX-In signals to avoid distortion.

8) Mode: Stereo/Mono: Choose Mono if the input signal is in mono.

This will send the mono signals to both L&R channels.

(Blue)- Power LED: System power supply indicator.

(Green)- Signal LED: Input signal indicator.

(Red)- Protection LED: Amplifier protection indicator.

(Yellow)- Limit LED: Clip indicator.

Fig. 1