DAPAudio X-12MA Manual - Halaman 8

Jelajahi secara online atau unduh pdf Manual untuk Pembicara DAPAudio X-12MA. DAPAudio X-12MA 13 halaman.

Controlpanel

Volume control

Use to adjust the input volume level for the X-12MA.

2. Limiter LED

We suggest you to set the input level with the L-R level controls in such way that the LED blinks

occasionally. If the LED lights up continuously we strongly suggest you to lower the volume (1).control.

3. Loudness button

The loudness circuit amplifies certain frequencies in order to get a more full sound at low volumes.

Low frequency control

Use to set the optimal crossover frequency for the active subwoofer connected to the low output.

5. Satellite/ fullrange button

Allows you to switch the X-12MA as either a satellite speaker (in combination with an optional active

subwoofer) or as a full range speaker.

6. Combo Input

This input equipped with 3 pole XLR/ jack combo socket is electronically balanced to accept the (line

level) signal from any mixing console.

7. Full range XLR output

For linking several X-12MA speakers.

8. Low XLR output

For connection of an optional active subwoofer.

9. Powercon

AC inlet

This connector is meant for the connection of the supplied main cord. Connect one end of the power

cord to the connector, the other end to the mains, then turn on the power (11) switch to operate the

unit.

Make sure that the supply voltage matches the operation voltage before connecting the unit to mains

Fig. 2

Fig. 3