DURASTEEL Cart Table w/ Cart Legs Manual Petunjuk Perakitan - Halaman 5
Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Perabotan Dalam Ruangan DURASTEEL Cart Table w/ Cart Legs. DURASTEEL Cart Table w/ Cart Legs 11 halaman. Wooden table
Halaman Cetak
• Simple Work Table w/ U-Shaped Bracing
Install w/ Standard Table Legs and U-Shaped Bracing
1
2
3
*Table Legs and U-shaped Bracing are optional.
If you would like to assemble DuraSteel Galvanized Table Legs and U-shaped Bracing with your Wooden Top Shelf, please order them by
refering to Page 8.
The screw holes are pre-drilled on the wooden tabletop, it is easy to fasten the screws with a screwdriver. If the holes are not wide
enough, please follow the hole position to redrill 25mm deep holes with 5mm drill bit.
1
1. Mark the position on the legs
You can use tape to mark the position on the legs
in advance for being level. (The bottom of brace
set should be at least 8" above the floor.)
3
3. Measure the positions of leg sockets
After placing leg sockets on the corners of
wooden shelf, try to make the whole leg and leg
socket set in the middle of shelf. Make sure the
leg sockets and shelf edge to parallel, and fix
sockets to shelf with self-tapping screws.
4
5
7
6
8
2. Assemble table base
Insert cross braces into bracing sockets and fasten
them. Slide legs into brace set assembled. Then,
tighten all Allen screws to fix legs to brace set.
4. Fasten legs to leg sockets
Using Allen wrench and screws to fasten legs to
leg sockets. Then, turn the whole unit upside. The
wooden table with U-shaped bracing is done, and
ready to use!
3
Top Shelf (1)
Table Legs (4)
Leg Sockets (4)
Cross Braces (3)
Bracing Sockets (4)
Self-Tapping Screws (16)
Allen Screws (16)
Allen Wrench (1)
2
4