DAPAudio D2680 Panduan Produk - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Produk untuk Penguat DAPAudio D2680. DAPAudio D2680 16 halaman. 8 zones multiroom system

2. DIP switch 6 can be used to switch the autobroadcast function On or Off.

Dip switch 6 = 1

Pressing the Call switch on the frontpanel of the AVP-800P will generate a call even if a keypad is

powered off. If a keypad is powered off the AVP-800 will automatically start up the keypad in call

mode.

Dip switch 6 = 0

Pressing the Call switch on the frontpanel of the AVP-800P will generate a call only for the keypads

Which are powered on. If a keypad is powered off, it will remain powered off.

3. DIP switch 7 can be used for Auto Gain Selection (AGS). This function automatically levels the volume

of all inputs at the same level.

DIP switch 7 = 0

Enable AGS

DIP switch 7 = 1

Disable AGS

Connecting Multiple Units

Use CAT5 cables to Link the System Control busses. Be sure to address the units properly. For more details

see the chapter on DIP- Switch settings on page 7.

Use a 26-pole IDC flatcable to connect the OUT of the Master with the IN of the first Slave, the OUT of

Slave 1 with the In of Slave 2 etc. You can expand up to 15 slaves.

Fig. 4