Duratech DLC-010 Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Pengontrol Duratech DLC-010. Duratech DLC-010 11 halaman.

Halaman Cetak

Box content

x1
x1
x1
x1
4
Technical specifi cations
General specifi cations
x4
Input Voltage:
Output Voltage:
Max output Current:
x4
Max rating relay contact
Ambient Air Temperature:
Humidity
Ingress protection rate:
x4
IEC Protection Class:
x4
x4

Introduction

The DLC-010 is a controller for the DuraCover System
The device has following functionalities:
x2
•
Programmable open and close positions
•
Local control (via key switch) and/or remote control (via LinkTouch +
PLP-REM(-350))
•
Dead man switch mode (DMS), can be set to open the cover and/or close
the cover
•
Soft-start and soft-stop
•
Torque reduction when overload occurs
•
Status indication with multi-color LED
Dead man switch (DMS) mode is a working mode that requires the user to
keep controlling the open or close switch while operating the cover. When
the control is released, the cover movement stops immediately.
230 VAC 50Hz
24 VDC
11 A
1A / 250 VAC
0°C to +40°C
10% to 90% RH - non condensing
IP54
Class I
5