Duratech LINK Touch DLT10-RGB Manual - Halaman 4
Jelajahi secara online atau unduh pdf Manual untuk Kontrol Jarak Jauh Duratech LINK Touch DLT10-RGB. Duratech LINK Touch DLT10-RGB 14 halaman.
Halaman Cetak
Control functions: pool lights
Colour temperature:
Slide to the right to adjust the pool light
from "warm white" to "cool white"
ON/OFF Lights:
Press to switch all Lights ON/OFF
Colour wheel:
Slide to change colour of Pool Lights
(only DLT10-RGB)
Colour program:
Dimming level:
Slide to the right to increase
the brightness of the Pool Lights
Colour program:
Press for previous colour program.
6
Press for next colour program.
Control functions: heat pump & pool cover
Pool water Temperature DOWN:
Press to decrease desired temperature
ON/OFF heat pump:
Press to switch pool heat pump
ON/OFF
Pool cover OPEN:
IN DMS MODE: Press and hold to open
te pool cover. When finger is removed
from button the cover will stop imme
diately.
NOT IN DMS MODE: Press once after
calibration and cover fully opens.
NOTE:
Depending on AUX MODE, in settings
COVER OPEN/CLOSE or FUNC A/B.
Pool water Temperature UP:
Press to increase desired temperature
Pool cover CLOSE:
IN DMS MODE: Press and hold to close
te pool cover. When finger is removed
from button the cover will stop imme
diately.
NOT IN DMS MODE: Press once after
calibration and cover fully closes.
*Depends on DMS mode, when AUX is set to
cover.
7