Duratech LINK Touch DLT10-RGB Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Kontrol Jarak Jauh Duratech LINK Touch DLT10-RGB. Duratech LINK Touch DLT10-RGB 14 halaman.

Temperature units display setting

The temperature units on the display can be set to Celsius or Fahrenheit

SETTINGS

Temp °C/°F

°C

SETTINGS

Temp °C/°F

°C

Go to "TEMP °C/°F" in the settings

menu.

Touch the screen to select the

required units. (note that default

setting is set to "°C".

This setting will allow the installer to change the cover function to an

ON/OFF function for a different device.

The "Aux Setting" can be set to "Cover" or "Auxiliary".

If set to "Cover" then the LinkTouch

If set to "Auxiliary" then the LinkTouch

cover buttons and the buttons will act as an "ON" and "OFF" button.

SETTINGS

Aux setting

cover

SETTINGS

Aux setting

auxiliary

SETTINGS

Aux mode A

toggle

is considered to control a cover system.

will control a different device with the

Go to "AUX SETTING" in the settings

menu.

Touch the screen to select "AUX

SETTING AUXILIARY".

Go to "AUX MODE A" in the settings

menu.

Touch the screen to select the

required mode "TOGGLE" or "PULSE".

NOTE:

Repeat for "AUX MODE B"