Belimo FS Series Lembar Instruksi - Halaman 2

Jelajahi secara online atau unduh pdf Lembar Instruksi untuk Mesin Belimo FS Series. Belimo FS Series 18 halaman. Replacement of multiproducts motors
Juga untuk Belimo FS Series: Petunjuk Manual (20 halaman), Penggantian (19 halaman)

Halaman Cetak

In the "Marking & Application Guide, Dampers for Fire Barrier and Smoke

Applications & Ceiling Dampers" April 2003 by Underwriters Laboratories

Inc.®, page 6 they state:

DAMPER ACTUATORS

"... field mounting or substitution of actuators is not covered within the scope

of the UL certification of the product. However, this does not necessarily

preclude replacement of actuators in the field. Like any appliance, field

servicing of these products is not covered under the scope of the UL

certification and factory follow-up service program. As with any part of the

damper, it is expected that replacement of actuators in the field be done in

accordance with the damper

This document follows the UL requirements and the acceptance testing

that is necessary to ensure proper operation of a fire and smoke damper after

actuator replacement.

Code and Standard Issues

In general, the administrative section of codes state that all mechanical and electrical systems

must be kept in working order and an individual section may state that all life safety devices and

systems must be operable. NFPA 80 (Fire) & NFPA 105 (Smoke) require periodic testing and

repair of dampers as soon as possible after any deficiency is uncovered.

Fire & smoke dampers are considered to be appliances and field replacement of components is to

be expected when failure of any component occurs.

The Authority Having Jurisdiction (local Fire Marshal and/or Building Official) must be consulted if

any blade or auxiliary switches are employed and are connected to the fire alarm system or to a

Fire Fighters Control System. A permit and inspection may be required since connections to an

alarm system have been touched.

INSTRUCTION SHEET

manufacture's

normal field servicing program."

Replacement of Multiproducts motors with Belimo FSxx Series