DAPAudio DCP-24 Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Perekaman DAPAudio DCP-24. DAPAudio DCP-24 20 halaman.

Halaman Cetak

Adjust the limiter threshold by dialing the jogwheel (8). Click the jogwheel (8) to proceed with the next

parameter.

Adjust the limiter release time (in ms) by dialing the jogwheel (8).

IMPORTANT!

Enabling the limiter on a specific output also changes the way in which the level is

displayed on the corresponding LED VU meter: The level shown on this meter is no longer the

"absolute" output level, but the level of the signal at -24dB, -12dB, -6dB, -3dB compared to the limiter's

threshold (orange limit LED), no matter what the threshold value is.

Now you've completed setting up input channel A. If the input channels are not linked, you have to push

the channel up (3) button and set up input channel B the same way as shown for channel A.

Output setup

Select output 1 by pushing the Channel Up (3) button or the Channel Down (4) button. If you are only

able to select Out 12 and Out 34, all 4 channels are linked. If you want to adjust all 4 output channels

separately, you'll have to unlink the channels (see page 11).

Adjust the gain by dialling the jogwheel (8). Pushing the Item Up (2) button allows you to proceed with

the next item, in our example the mixer.

Adjust the mix volume for input A by dialling the jogwheel (8). Pushing the Item Up (2) button allows you

to proceed with the mixer menu. Note: the mix menu is only enabled if the input channels are not linked.

Adjust the mix volume for input B by dialling the jogwheel (8). Push the Item Up (2) button to proceed

with the Delay setup.

Click the jogwheel (8) to adjust the "delay" in mm, inch or ms. Then adjust the delay time by dialling the

InA

Limiter

Thr.: 0dbu

11,75dB_________

_________

InA

Limiter

rel.: 50

11,75dB_________

_________

Out 1

gain

-1.25db

11,75dB_________

Out 1 mixer:

_________

Input A: odb

11,75dB_________

_________

Out 1 mixer:

Input b: off

11,75dB_________

_________

Out 1 delay

0mm

11,75dB_________

_________