Duratool ZD-915 Manual - Halaman 4
Jelajahi secara online atau unduh pdf Manual untuk Stasiun pengerjaan ulang Duratool ZD-915. Duratool ZD-915 5 halaman. Desoldering rework station
Halaman Cetak
①shows the actual temperature of the tip.
②shows the setting temperature. Short press the "UP"/"DOWN" button to adjust the
③Press the ℃/℉ button to change the temperature unit between ℃ and ℉.
temperature by ±1℃. Long-press the button to adjust it quickly..
④When the actual temperature of the tip is lower than the setting, "HEAT ON" will
⑤When the difference is more than ±10℃ between the actual and setting
display.
⑥When "ERROR" displays, there may be some problem with the system. Or the
temperatures, "WAIT" will display. Wait until it has disappeared.
soldering iron/hot air gun is not correctly connected.
4. Caution!
4.1 The power cord can only be inserted in approved power sockets or adapters.
4.2 High Temperature
The temperature of the desoldering tip will reach as high as around 480℃（896℉）
when the power switch is on. Since mishandling may lead to burns and fire, be sure to
comply with the following precautions:
Do not touch metallic parts near the desoldering tip.
Do not use this appliance near the flammable appliances.
Advise other people in the work area that the appliance can reach a very high
temperature and should be considered potentially dangerous.
Turn off the power switch while taking breaks and when finishing using.
Before replacing parts or storing the appliance, turn off the power and let it cool
down to the room temperature.
4.3 take care of your appliance
Do not use the appliance for any applications other than desoldering.
Do not hit the desoldering gun against the work bench or otherwise subject it to
severe shocks.
Please turn off the power before connecting or disconnecting the desoldering gun.
4.4 Maintenance
Before further use, safety devices or slightly damaged parts must be carefully
checked for error-free and intended operation. Inspect moving parts for error-free
operation and that they don't bind, or whether any parts are damaged. Damaged
safety devices and parts must be repaired or replaced by a qualified technician, so
long as nothing else is indicated in the operation manual. Use only accessories or
attachments which are listed in the operation manual. Use of other appliances and
other accessories can lead to a danger of injury.
4.5 Keep children at a distance