DuraTrel 11126 Panduan Perakitan & Instruksi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Perakitan & Instruksi untuk Perabotan Luar Ruangan DuraTrel 11126. DuraTrel 11126 7 halaman. 6' picnic table with benches

Halaman Cetak

Loosely bolt two table legs (part 14) together using 3½" bolts, washers and nylock nuts. Make sure pilot

holes for brackets are at the same end. Place each set of bolted legs into the bracket slots from step 1.

Line up pilot hole and fasten legs to table using 2 ¼" bolts, washer and nylock nuts.

Remove bottom nylock nut on one leg and slide bolt through the hole on angel brace (part 7). Replace

nut and tighten snugly. Repeat for opposite side. Overlap the two diagonal braces in the center of

table. Drill two 3/32" pilot holes through the diagonal braces and into center brace. Fasten with 1 ½"

screws to the center tabletop brace.

Apply glue to inside edges of four 7 ¼" (part 11) table leg end caps. Press end caps onto ends of table

legs (DO NOT slide from end). Take care that end cap is flush and use a file to round off any sharp

edges.

6' Picnic Table with Benches - Page 4