DAQ system ADP-ADI01 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat Keras Komputer DAQ system ADP-ADI01. DAQ system ADP-ADI01 10 halaman.

2.5 SW3 Setting

 GRP2..1EN --- Enables Audio Group 2..1 embedding. Set High to enable.

 SMPTE --- Control Signal Input/Signal levels are LVCMOS/LVTTL compatible

It is used to enable/disable all forms of encoding/decoding, scrambling and

EDH insertion.

When set LOW, the device operates in data through mode.

(DVB_ASI : 0, DVB_ASI : 1) No SMPTE scrambling take place and none of the I/O

processing features of the device are available.

When set HIGH, it carries out SMPTE scrambling and I/O processing.

 IOPROC_EN --- Control Signal Input/Signal levels are LVCMOS / LVTTL compatible

When IOPROC_EN/DIS is High, I/O processing features are enabled,

When IOPROC_EN/DIS is LOW, I/O processing features are disabled.

Only applicable in SMPTE mode.

1 2 3 4

[Figure 2-6. SW3 switch]

It is used to enable or disable I/O processing features.

ADP-SDI01 User's Manual(Rev(1.1)

http://www.daqsystem.com