Duratuf GS72 Manual Petunjuk Perakitan - Halaman 15

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Penyimpanan Luar Ruangan Duratuf GS72. Duratuf GS72 16 halaman.

FIT DOORS

STEP 1:

• Place the doors in the panel (In open position,

approx 25mm below top of top plate). Using

two rivets, rivet the top and bottom hinges to

the Door Jamb Flashing, ensuring door closes

properly.

• Fit remaining rivets.

• Repeat with second door.

FIT PADBOLT

• Rivet Padbolt to door and keeper onto Door Jamb as shown.

FIT BACK PADBOLT

•

Rivet back pad bolts to pad bolt supports then rivet padbolt

supports to back of L/H door (Top and bottom).

•

Using 10mm drill bit, drill hole into top and bottom timber

plates.

IMPORTANT— CLEAN UP

REMOVE ALL DRILL FILINGS FROM ROOF, WALLS AND CHANNELS THOROUGHLY. FAILURE TO DO THIS

WILL RESULT IN CORROSION AND COULD THEREFORE VOID THE WARRANTY

YOUR DURATUF GUARDIAN SHED IS NOW COMPLETE. RELAX......