Duratuf KL1 Manual Petunjuk Perakitan - Halaman 7

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Penyimpanan Luar Ruangan Duratuf KL1. Duratuf KL1 16 halaman. Kiwi series

Step 1: Front Wall: Position first wall sheet on the

left hand side of the doorway with the sheet LIP

on the left hand side. Ensuring the LIP is flush

with the side of the corner Stud and the top is

45mm below the top of the Ridge Beam, tack in

place. Repeat on other side of doorway.

Step 2: Back Wall: Position the first Wall Sheet with

the LIP on the right hand side. Ensuring the LIP

is flush with the side of the corner Stud and the

top of the Wall Sheet is flush with the top of the

Top Plate, tack in place. Position the next Wall

Sheet with the LIP on the right hand side. Over-

lap as shown in fig 1. Ensuring Wall Sheet is

flush with top of Top Plate, tack in place. Re-

peat with remaining Wall Sheet.

Step 3: End Walls: Position wall sheet with the LIP

flush with the side of the stud and the top of

the Wall Sheet is flush with the top of the Top

Plate, tack in place. Tack in remaining 1/2 Wall

Sheet. Repeat with the other end. If fitting a

window, nail in Window Studs and Nog now.

Refer to Window instructions.

Step 4: Nailing Off: Nail one 30mm Clout each side of the Rib (two per Pan) into the Top Plates and Bottom

Plates. Nail

30mm Clouts evenly spaced.

KL3 WALL CLADDING

Wall Sheets to mid wall Nogs (one per pan). Nail each corner Wall Sheet to Studs using two

45mm BELOW

TOP OF RIDGE

EDGE

FLUSH

BEAM