Duratuf KIWI KL1 Manual Petunjuk Perakitan - Halaman 13

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Penyimpanan Luar Ruangan Duratuf KIWI KL1. Duratuf KIWI KL1 16 halaman.

Step 1: Place shed in final position. Check the di-

agonal measurements are the same and

the shed is level before fitting Floor. It is

recommended that the shed is anchored

down with either a Duratuf Bolt Down Kit or

Duratuf Peg Down Kit depending on what

the shed is sited on.

Step 2: Lay a Floor Board on top of Bottom Plates

and Joist and push up against end wall.

Mark out where Studs are. Cut checkouts

with Electric Jigsaw so Floor Board will fit

around Studs.

Step 3: Re-position Floor Board. Lay out remaining

Floor Boards checking around Studs as

you go. The last Floor Board may have to

be cut to size.

Step 4: Nail in each Floor Board, two 50mm nails in

each end and two into Joist. Measure and

cut Floor Flashing (110) to fit in between

Door Jamb Flashings and nail in place us-

ing 50mm Clouts.

KL1 FLOOR (Optional)