4-Max PP-TESC AU Series Cara Memprogram

Jelajahi secara online atau unduh pdf Cara Memprogram untuk Pengontrol 4-Max PP-TESC AU Series. 4-Max PP-TESC AU Series 2 halaman.

How To Program a "PP-TESC**AU ESC (E

This guide will go through the steps to program your PP-TESC**AU (Green Heatshrink) ESC.

How to program a "PP-TESC**AU ESC using the programming card

Position the black jumpers on the pins on the programming card (They simply pull off

•

and push on) in your desired positions. Suggested places are shown below.

Sport and basic aerobatic models

Multi motored models

Connect the servo type plug from the ESC to the top 3 pins on the right hand side.

•

Paying close attention to the polarity. Do not connect anything to the top left pins.

Please see connection photo.

This is a guide only Without prejudice . 4-Max Models Ltd does not accept any liability whatsoever with regards to any injury or damage caused by

advice contained within or not contained within this guide.

Gliders with folding propellers

October 2018 Rev2.

www.4-Max.co.uk

lectronic

peed

3D aerobatic models

www.4-Max.co.uk

)

ontroller