Contemporary Controls CTRLink EISC-100T Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Contemporary Controls CTRLink EISC-100T. Contemporary Controls CTRLink EISC-100T 8 halaman. Ethernet configurable switching hub

Halaman Cetak

Installation

Mounting

The EISC is designed for mounting in an industrial enclosure or wiring

closet using either set of the provided mounting hardware listed below:

TS-35 DIN Rail Mounting

DIN rail clip

4-40 screws, pan-head (2)

For quick snap-mounting onto TS-35 mm DIN rail, a DIN rail clip is

pre-attached to the back of the enclosure with two #4-40 pan-head

screws.

If the clip is removed, the unit can be panel-mounted by

extending the top and bottom brackets which are shipped in retracted

position. The extended brackets can then anchor the unit to a wall or

other flat surface with two #8 pan-head screws (not provided). The left

illustration of Figure 1 shows a rear view of the unit with brackets in

retracted position. The right illustration of Figure 1 shows the brackets

extended and secured to the unit enclosure using the same screws that

were used in the retracted position.

Figure 1 — Using the Panel-Mounting Brackets

Panel Mounting

Panel mounting bracket

4-40 screws, flat-head (4)

TD021000-0IF