Contemporary Controls BASRT-B Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Router Jaringan Contemporary Controls BASRT-B. Contemporary Controls BASRT-B 20 halaman. Bacnet/ip to ms/tp router

Halaman Cetak

1. Webpage Configuration

Figure 10 — 3-wire MS/TP Bus with Separate Power Sources

Limited Power Sources

The router should be powered by a limited power source

complying with the requirements of the National Electric Code

(NEC) article 725 or other international codes meeting the same

intent of limiting the amount of power of the source. Under

NEC article 725, a Class 2 circuit is that portion of the wiring

system between the load side of a Class 2 power source and the

connected equipment. For AC or DC voltages up to 30 volts, the

power rating of a Class 2 power source is limited to 100 VA. The

transformer or power supply complying with the Class 2 rating

must carry a corresponding listing from a regulatory agency such

as Underwriters Laboratories (UL).

LEDS

Power glows green if power supplied to the unit is proper

Ethernet glows solid for a valid link (green for 100 Mbps or

yellow for 10 Mbps) and flashes to show activity

MS/TP flashes green when receiving valid MS/TP traffic

TD071200-0IC