4-noks Power Reducer Panduan Teknis - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Otomatisasi Rumah 4-noks Power Reducer. 4-noks Power Reducer 20 halaman.

4-noks Power Reducer Panduan Teknis
1

Product Overview

Power Reducer is a load diverter designed to automatically divert the excess energy produced from a PV system to a
resistive load, such as an immersion tank, rather than exporting to the GRID.
There are 2 different versions of Power Reducer, which provide 2 distinct modes of controlling the diversion of the
surplus generated energy.
SA
Stand Alone
The Stand Alone version comprises of the Power Reducer SA and a Current Transformer (CT). The CT detects the en-
ergy exchange with the GRID and in particular the energy flow directions. Thus it distinguishes when the household is
drawing energy to satisfy consumption or exporting when the PV system is generating surplus to requirement.
E4U
Elios4you
This second version of the Power Reducer provides the measurements and commands that are managed through Eli-
os4you and its mobile application interface with dedicated graphics.
Elios4you features 2 Current Transformers (CT), one to detect the energy exchanged with the GRID and the other to
monitor the energy generated by the PV installation. The mobile application interface allows detailed understanding of
the PV system and a more refined control over the generated power by means of the Power Reducer (E4U)
Both versions of the Power Reducer perform the same basic functionality, which is to divert surplus generated power to
a resistive load such as the immersion tank even when this surplus power is less than the rated power required by the
resistive load. The Power Reducer accomplishes this feat by modulating the load to force it to operate at the lower rating
in a continuous manner over time, thus avoiding the need to import energy for this load from the GRID.
Example: Supplying a 1700W resistive load with say a 400W surplus from the PV system. In this case the Power Re-
ducer will warm the resistive load with just 400W avoiding any drawing of the 1300W of power from the GRID which
would normally take place without the Power Reducer.
SA
4-noks srl
Via per Sacile, 158
31018 Francenigo di Gaiarine (TV) ITALY
Tel +39 0434 768462
Fax +39 0438 694617
www.4-noks.com

Stand Alone version

Elios4you version
E4U
Pag
3