Contemporary Research ICC1-IR Panduan Produk - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Produk untuk Router Jaringan Contemporary Research ICC1-IR. Contemporary Research ICC1-IR 17 halaman. Ir tv controller, 1-way rf coax control
Juga untuk Contemporary Research ICC1-IR: Spesifikasi (2 halaman)
Halaman Cetak
Specifications
Physical
Size:
Weight:
Enclosure:
Mounting:
Rear Panel
RF In
RF Out:
Net LED:
IR Out:
IR Out LED:
Power Sensor:
Power Sensor LED:
Power In:
DIP Switches:
iCC-Net
Operation:
Data Receive:
CC-HSD Scan Sensor
Range:
Includes:
Includes
CC-HSD Scan Sensor
CC-IRE IR Emitter
RF Loop cable, 18"
12 VDC power supply, 100 mA, (domestic US shipments only)
Mounting Velcro for unit and CC-HSD
Contemporary Research
5.5" [140mm] wide x 1.1" [28mm] height x 3.4" [86mm] deep
8 oz [226g]
All aluminum with durable black powder coat paint
Mounts rear of TV
'F', female, 75 ohm impedance, RF from CATV system, iCC-Net control
'F', female, 75 ohm impedance, RF to TV, less than -1.5 dbmV loss
Green LED for iC-Net bus and DC power, flashes once per second if active
3.5mm jack for CC-IRE IR Emitter cable or compatible CC-IRS serial cable
Supports carrier frequencies up to 62 KHz
Shipped with CC-IRE cable, 10 foot with stick-on IR emitter
Red LED lights when sending IR commands
3.5mm jack for included CC-HSD scan sensor
Also acts as logic level input, switch to GND to signal power on
Red LED lights when sensor indicates power on
2.1mm coaxial jack (inside center conductor positive), 75 Ma maximum
11.5 to 16.5 VDC, 12 VDC typical (may be unregulated)
North American version includes UL/CSA listed wall power supply
S1 and S2, located on bottom of unit, sets IR code operation and device number
1-way control, carried over the same RF coax connection as TV channels
Mid-band VHF, 74.7MHz, sent from ICC-HE
-25 to +35 dBmV signal level
Senses presence of TV scanning, from 15-35 KHz, magnetic pick-up
3.5mm plug, 4ft. cable, stick-on TV sensor
4
ICC1-IR IR TV Controller