Addonics Technologies HDUS1125LT Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat Keras Komputer Addonics Technologies HDUS1125LT. Addonics Technologies HDUS1125LT 18 halaman. 1:11 2.5” hdd duplicator lt

Halaman Cetak

Firmware Update Procedure

(Requires one hard drive containing the rmware le):

1. Create a 50MB HDD partition with FAT/FAT32 or NTFS les system on any SATA hard drive

2. Download the rmware and unzip the le to .BIN le format

3. Copy the .BIN le onto the 50 MB partition of the HDD

4. Insert this drive to the Source slot of the duplicator. For subsystem, connect the drive to the

Source SATA port

5. Select "Firmware Update" function under the "Setup" or "Advanced Setup" menu and press

ENT to do the update. To access the "Advanced Setup", hold onto the ESC button for 5 seconds.

The new option will appear

6. Once completed, it will reboot and show you the new rmware version

Notes:

SECURE ERASE - HDD duplicator sends a WIPE

command to the hard drive. This command lls 00 string to entire HDD

OVERWRITE - There are three options: One pass, 3 passes and 7 passes 5220.22-M. The duplicator

writes a string of pattern over the entire disk one time, three times or seven times. (5220.22-M is

the DoD standard for drive sanitization)

Please note that some drives may become locked and cannot be initialized after the SECURE ERASE

or OVERWRITE. Should this happen, use the following procedures to unlock the drive:

1. Place drive in the source slot

2. Execute "PreScan" function for 1 minute

3. Press "ESC" key until you see "User Abort" on the LCD screen

4. Now remove the drive from the duplicator and connect it to your system, the HDD should be

recognized and be able to initialize again

www.addonics.com

Phone:

Fax:

Email:

408-573-8580

408-573-8588

http://www.addonics.com/sales/query/