APLIC 20180312SZ141 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori APLIC 20180312SZ141. APLIC 20180312SZ141 12 halaman. 1800mah, hand warmer function

Halaman Cetak

4 Commissioning

Take the device out of the package and remove all the packaging material. Charge

the Powerbank fully before using it for the first time. Use the microUSB connec-

tion of the Powerbank (charging port) to charge it.

For charging devices with the Powerbank, use the USB port (output) and connect

the terminal device to be charged with the corresponding charging cable and the

Powerbank. You can switch on or switch off the Powerbank by briefly pressing the

"Multifunction button".

5 Hand heater function

•

To switch on the Powerbank, press the "Multifunction button" briefly. The

status LEDs 1-3 light up for a short time.

•

Then, press and hold the "Multifunction button" for about 3 seconds. The

first level of the hand heater function is thus, enabled. Now, the device heats

up to heating level 1.

•

To enable the second level of the hand heater function, once again press the

"Multifunction button" briefly. Now, the device heats up to heating level 2.

Press and hold the "Multifunction button" for about 3 seconds to disable the hand

heater function. To disable the connected device completely, press the "Multifunc-

tion button" briefly once again.

Note! Please note that the hand warmer function is used only for

low ambient temperatures.

English