APLICOM D108300 A9 PRO Panduan Instalasi - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk GPS APLICOM D108300 A9 PRO. APLICOM D108300 A9 PRO 13 halaman. Telematics unit
Halaman Cetak
Technical Data
6,8...32Vdc (nominal +12Vdc)
Supply voltage
Current
Typical: < 100mA
consumption
Max (peak): 1A / < 1s
GPS antenna
3Vdc
power supply
Fuse
External fuse on power cable: 3A
Internal fuse: 3A/slow
Operating
-30°C...+70°C (see Note 1)
temperature
-5°C...+65°C With internal battery
0°C...+45°C internal battery charge
Storage
-40°C...+80°C
temperature
Power switch
None, IGN and SW controlled
Common
Internal GSM antenna
connections
MCX for GPS antenna
1 x Molex Microfit, 9 pin
for PWR and IO
1 x Molex Microfit, 3 pin for 1-Wire interface
Note 1: Ensure SIM cards operating temperature range from telecom service provider.
WARNINGS
•
Warranty is voided if case is damaged.
•
A9 device and all peripherals must be powerless during the installation. Turn off ignition and disconnect power.
•
Do not use detergents to clean the device.
•
GPRS may interfere sensitive electronics. Install unit as far away from sensitive electronics as possible.
•
All devices connected to A9 device must have a fuse protection.
•
All signal inputs connected to A9 must be fuse protected, max 3A.
Dimensions
Weight
Housing / material
User interface
Options
Warranty
CE marking/Approvals
Relative humidity
61mm (W) x 112mm (L) x 13mm (H)
70g with internal battery
IP31, PC/ABS LG chem.
GN5001TF
SIM card slot (inside the unit)
Indicators (LED):
Led - JAVA appl.
CAN option
1 year
according to directives:
2011/65/EU (RoHS)
2014/53/EU (RED)
ECE r.10.05 E-type approval
+95% max
10