Aplisens ZSP-41/2 Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Konverter Media Aplisens ZSP-41/2. Aplisens ZSP-41/2 16 halaman.
Halaman CetakIO.ZSP-41.SP-11.SP-02
7.
INSTALLATION
Isolator housing allows for installation on the following rails:
TS-32 (EN 50 035),
TS-35 (EN 50 022).
Rail-mounted Signal Converters must be used in conditions specified in this user manual.
Clamp connection configuration and typical operation configuration is illustrated in figure 2, 5, 8,
11. Selection of input and output signals with switches while isolators are energized does not
cause damage.
8.
CONNECTING
All connection and installation steps must be performed with power disconnected.
Power supplies and isolators are equipped in plug-in connectors protecting against
incorrect wiring.
8.1.
Connecting the ZSP-41 and ZSP-41/2
The ZSP-41 isolator is only equipped with one input clamp block, mounted to clamps 1-2.
After selecting dual-line converter, the connection must be reclamped to clamps 3-4.
4
Figure 1. Housing - dimensions
03.B.005