4CR ECO IR 1 Panduan Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pengering 4CR ECO IR 1. 4CR ECO IR 1 10 halaman. Infrared dryer

1. Connect the electricity. The supply cable must be at least

Make sure the supply voltage and frequency are as specified correspond to the type

plate of the device.

2. Set the distance between the device and the workpiece. Usually a distance of 30 – 60

cm is to be kept.

3. Switch on the device with the ON / OFF switch. Set time and temperature according

to the manufacturer's specifications of the applied materials to achieve the desired

result.

4. After the timer has elapsed, switch OFF the device with the ON / OFF switch.

5. After use, disconnect the device from the power supply and store it in a safe place to

Prevent improper handling and damage to the device and the fluorescent tube.

Watch out! Device heats up during use. Injury and fire hazard!

Switch off the appliance after use. Store the device in a safe place to avoid

damage.

4. Operation

ON/OFF

4mm² at 230V.

TIMER