Acer 930 Panduan Bios - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Bios untuk Server Acer 930. Acer 930 46 halaman. High-performance system board
Juga untuk Acer 930: Panduan Pengguna (16 halaman), Manual (32 halaman)

Halaman Cetak

2.2.11

IDE Secondary Channel Slave

This parameter specifies the current configuration of the IDE device

connected to the slave port of the secondary IDE channel. For information

on how to configure IDE devices, see section 2.4.2.

2.2.12

Total Memory

This parameter specifies the total system memory. The memory size is

automatically detected by BIOS during the POST. If you install additional

memory, the system automatically adjusts this parameter to display the new

memory size.

1st Bank

This parameter indicates the type of DRAM installed in bank 1. The

setting indicates that there is no DRAM installed. For the location of bank

1, refer to Figure 1-2.

2nd Bank

This parameter indicates the type of DRAM installed in bank 2. The

setting indicates that there is no DRAM installed. For the location of bank

2, refer to Figure 1-2.

3rd Bank

This parameter indicates the type of DRAM installed in bank 3. The

setting indicates that there is no DRAM installed. For the location of bank

3, refer to Figure 1-2.

4th Bank

This parameter indicates the type of DRAM installed in bank 4. The

setting indicates that there is no DRAM installed. For the location of bank

4, refer to Figure 1-2.

2.2.13

Serial Port 1

This parameter indicates the serial port 1 address and IRQ setting.

2-6

None

User's Guide