Dasan DW-770B Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Headset Dasan DW-770B. Dasan DW-770B 11 halaman. Monaural dect wireless headset

Halaman Cetak

Answering a call using a telephone with Lifter attached



The telephone rings



While wearing the headset, press the ON/OFF button on the headset



The lifter function activates (telephone connection opens)



To end the call press the ON/OFF button on the headset



The lifter function will de-activate (telephone connection closes)

Adjusting the TX (transmit) volume

The TX (transmit) volume can be adjusted using the volume control located on the

bottom of the base unit.

Adjust the volume by pushing the control up or down button to increase or

decrease the level. The volume should be set to personal preference.

To adjust follow these steps:



Make a telephone call and ask the person you are calling for their assistance.



Adjust the volume as you talk by pushing the volume control up(+) or down(-)



Ask the person you are calling to tell you when the volume of your voice is

acceptable.



If the TX(transmit) volume is still low, then set the MICROPHONE

SELECTION switch located on the bottom of the base unit to "C"

Adjusting the RX (receive) volume

To adjust follow these steps:



Make a telephone call and ask the person you are calling for their assistance.



Adjust the RX (receive) volume by pressing the + or – (up/down) buttons on

the headset while your caller is speaking.

Muting the microphone



To MUTE the microphone on the headset press the MUTE button located on

the headset or Base unit.



To turn the MUTE off, press the MUTE button again. Normal operation will

now resume.

VoIP with PC



Connect USB cable (option) between PC and mini USB port of Base.



To make call or receive through, push the PC/TEL button first and then press

the ON/OFF button.

De-register all headsets



Press and hold the paring button on the base unit until BLUE LED starts to

blink fast, then release the button.



Press the pairing button seven times continuously. BLUE LED will be OFF.

Electronic Hook Switch



The unit enables you to answer and end calls remotely by using its built-in

electronic hook switch (EHS). EHS of the unit is only possible on certain

telephone systems supporting DHSG protocol like Siemens.

(DASAN DHSG cable: accessory)