Apogee Instruments MQ-620 Panduan Pemilik - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Ukur Apogee Instruments MQ-620. Apogee Instruments MQ-620 15 halaman. Quantum meter

Reset: To reset the meter, in either SMPL or LOG mode, push the mode button three times (RUN should be

blinking), then while pressing the down button, press the mode button once. This will erase all of the saved

measurements in memory, but only for the selected mode. That is, performing a reset when in SMPL mode will

only erase the manual measurements and performing a reset when in LOG mode will only erase the automatic

measurements.

Review/Download Data: Each of the logged measurements in either SMPL or LOG mode can be reviewed on the

LCD display by pressing the up/down buttons. To exit and return to the real-time readings, press the sample

button. Note that the integrated daily total values are not accessible through the LCD and can only be viewed by

downloading to a computer.

Downloading the stored measurements will require the AC-100 communication cable and software (sold

separately). The meter outputs data using the UART protocol and requires the AC-100 to convert from UART to

USB, so standard USB cables will not work. Set up instructions and software can be downloaded from the Apogee

website (http://www.apogeeinstruments.com/ac-100-communcation-cable/).