Apogee Instruments SF-110 Panduan Pemilik - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sensor Keamanan Apogee Instruments SF-110. Apogee Instruments SF-110 17 halaman. Radiation frost detector

Halaman Cetak

OPERATION AND MEASUREMENT

Connect the detector to a measurement device (meter, datalogger, controller) capable of inputting 2.5 V DC, and

measuring and displaying or recording a millivolt (mV) signal (an input measurement range of 0 to 2500 mV is

required to cover the entire temperature range of the detector). In order to maximize measurement resolution

and signal-to-noise ratio, the input range of the measurement device should closely match the output range of the

thermistor.

VERY IMPORTANT:

In January 2022, the SF-110 (formerly called the leaf and bud temperature sensor) underwent a

redesign to improve performance and ruggedness. As part of this redesign, the bud temperature sensor was removed, as it

was determined the leaf measurement was most critical. The SF-110 was renamed the radiation frost detector.

Radiation Frost Detector

Leaf and Bud Temperature Sensor