Apollo Xpander XPA-CB-14021-APO Panduan Komisioning - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Komisioning untuk Sensor Keamanan Apollo Xpander XPA-CB-14021-APO. Apollo Xpander XPA-CB-14021-APO 19 halaman. Diversity loop interface module
Juga untuk Apollo Xpander XPA-CB-14021-APO: Panduan Komisioning (14 halaman)
Halaman Cetak
Menu Level: (1.2)
Fault Status
Alarm Status *
Battery Level
Signal Level
Manual Update
Ident
Menu Level: (1.3)
Fault Status
Alarm Status
Battery Level
Signal Level
Manual Update
Ident
Displayed
Pack 1 OK
Pack 1 Warning*
Pack 1 Low
Pack 1 Missing
Pack 2 OK
Pack 2 Warning*
Pack 2 Low
Pack 2 Missing
Recommended replacement batteries:
Alkaline Panasonic Powerline 1.5V AA (Size M, LR6)
Alkaline Varta Industrial 1.5V AA (4006, LR6)
Alkaline Panasonic Powerline 1.5V C (Size L, LR14) for sounders only
Alkaline Varta Industrial 1.5V C (4014, LR14) for sounders only
Note: When replacement batteries are required all batteries must be replaced together.
* Batteries need to be changed as soon as possible (recommendation 7 days)
This menu shows the alarm status of the device.
* Input status on Input Output Unit - Displays the status of the monitored
input(s). A switch input 'closed' condition is displayed as a logic '1' For a
full range of analogue values please see Appendix A on page 14
This menu shows the status of the two battery packs in a device. Battery
conditions are displayed as follows:
Definition
Pack 1 battery voltage
healthy
Pack 1, 30 day warning
Pack 1, 7 day warning
No battery pack fitted
Pack 2 battery voltage
healthy
Pack 2, 30 day warning
Pack 2, 7 day warning
No battery pack fitted
© Apollo Fire Detectors Limited 2015
Icon on LCD
Full battery icon
Half battery icon
Empty battery icon
X
Full battery icon
Half battery icon
Empty battery icon
X
10
Analogue value at panel
25 (detectors)
16 (sounders and MCPs)
7
7
0
25 (detectors)
16 (sounders and MCPs)
7
7
0