Dash DPC100 series Buku Petunjuk dan Buku Resep - Halaman 6

Jelajahi secara online atau unduh pdf Buku Petunjuk dan Buku Resep untuk Blender Dash DPC100 series. Dash DPC100 series 15 halaman. Performance blender

Halaman Cetak

1. Parts & Features

USING YOUR BLENDER

Clean the Performance Blender and all of its components prior to assembly

and use. Remove any stickers and packaging before first-time use.

WARNING: Do not use the Blender for more than 3 minutes at a time. Do

not blend hot foods or liquids exceeding 175°F. Do not overfill the Blending

Pitcher - ingredients should never exceed the MAX line.

Place the Motor Base on a stable surface.

Place your ingredients in the Blending Pitcher. Make sure to put all liquid

ingredients in first, then powdered ingredients, and finally any solid

ingredients. Do not exceed the MAX line. You can use the Measuring

Cup to add ingredients to the Pitcher.

Attach the Measuring Cup to the Lid by aligning the notches on the Cup

with the slots in the Lid and turning the Measuring Cup clockwise. Place

the Lid on the Pitcher.

Set the Blending Pitcher into the Motor Base by aligning the marking on

the bottom of the Pitcher with the marking on front of the Motor Base.

Plug the cord into a power outlet. Turn the Dial to your desired blending

speed. To stop blending, turn back the Dial so that the Position Indicator

is pointing up. For turbo blending or pulsing, you can turn the Dial

counterclockwise.

Once you are done blending, wait for the blades to stop moving and

then unplug the Motor Base. Lift the Pitcher off the Motor Base.

Note: Ingredients can be added to the Pitcher while blending through the

small hole in the Lid. To do this, select a low speed, turn the Measuring Cup

counterclockwise to remove from Lid, and then pour in ingredients. Make

sure to never exceed the MAX line. Once done, return the Measuring Cup to

the Lid before switching to a higher speed.