Apollo Enclosures AE5550 Panduan Instalasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kandang Apollo Enclosures AE5550. Apollo Enclosures AE5550 16 halaman. Environmental tv enclosures (with tv swing brackets) mastering the outdoor tv viewing experience from the inside out

Halaman Cetak

Apollo Enclosures AE5550 Panduan Instalasi

Getting Started

1. Parts List

QUANTITY

Apollo Front Cover with Anti-Reflective Glass

Apollo Back Panel

TV Swing Brackets

Cable Cover Assembly

Assembly Hardware Kit

1" Extension Cord

2. Selecting the Best Viewing Location

a. For best viewing enjoyment, we recommend that you install your enclosure in a shaded area, under a

canopy, trees or facing away from the sun during your optimum viewing time of day. Positioning the

front of enclosure out of direct sun on the glass will also provide a clearer image and minimize the

tendency for direct sun to fight with the image and wash it out.

b. Direct sun exposure on the face of the enclosure may cause the TV to exhibit blackout spotting in the

picture screen, commonly known as "isotropic blackout," a condition during which some of the LCD

panel's cells temporarily shut down (go black) until the cells' temperature cools. Don't worry - there is

no permanent damage to your TV and the black spots will disappear when the sun is no longer on the

glass; however, it sure isn't fun to have a black spot on the screen while you're trying to watch a game.

c. For direct sun installations, contact Apollo at 888-507-1030 for potential technology options and

suggestions.

3. Installing the Apollo Mount to Your Outside Location

NOTE: We recommend that your mount be installed by a qualified professional. We accept no liability for

damages caused by incorrect assembly, installation or use.

Always refer to the installation instructions included with your mount.

Make sure that the supporting surface will safely support the combined weight load of the

equipment (enclosure and TV) and all attached hardware and components.

Make sure to use the proper mounting hardware and that all mounting hardware is

securely fastened

4. Unpacking your Apollo Enclosure

a. Remove the back panel from the carton placing it on a clean, smooth surface. (Do not remove the front

cover with glass, as this is your final step).

b. Use the parts list to verify all materials are included. Save the shipping container and all packing

inserts until installation is complete.

c. Snip wire ties securing two (2) TV swing brackets, which will be required for next step.

IG1902 43-86 Swing A

Description

Page 7