Apollo Sprayers PRECISION-6 Buku Petunjuk - Halaman 5
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Penyemprot Cat Apollo Sprayers PRECISION-6. Apollo Sprayers PRECISION-6 18 halaman. Auto turbine
Halaman Cetak2 TrueHVLP™ Spray Finishing Systems
C
CONGRATULATIONS!! You've just purchased the finest HVLP air turbine system available, and
you are about to enjoy the great benefits of Apollo TrueHVLP™ technology. Our designs are the
result of many years' experience in the manufacturing of HVLP turbine systems, and HVLP spray
guns. We have painstakingly worked and consulted with professional spray finishers to bring you
this versatile, precision engineered tool.
Whether you are new to spray finishing, you have spray finished before, or are just new to HVLP
spraying; there are some basic spray finishing guidelines that will help you to achieve the best
results and optimum success from your new equipment. Reading this information carefully and
following these simple steps will ensure that you get the best performance and results from your
new TrueHVLP™ spray system.
Check the contents of your box. The following are included:
(1) PRECISION-6 PRO Turbine Unit
(1) B7600 "The AtomiZer" TrueHVLP™ Spray Gun
(4) Nozzle / Needle sets
(2) Air caps
(1) 32' Air Hose
(1) Deluxe Cleaning Kit
(1) Electric Cord
2.1 How Your HVLP Turbine System Works
Your turbine system has three components: (1) the turbine unit, (2) spray gun and (3) air hose. The turbine unit, when connected
to the correct electrical power supply and with the on/off switch in the "on" position, provides a continuous source of clean, warm,
dry, High Volume Low Pressure (HVLP) air. The air hose connects the turbine unit to the spray gun. Air flows through the hose
to the nozzle of the specially designed TrueHVLP™ spray gun. Atomization of the coating is achieved when the air mixes with
the stream of fluid passing through the tip/nozzle. This low-pressure atomization principle achieves minimum misting (overspray)
to the spray environment.
2.2 How Your Spray Gun Works
The 7600 Series spray guns are non-bleeder style. When the turbine blower is turned "on", air will only flow through the air cap
when the trigger on the spray gun is activated or pulled back. Air also flows through the air feed tube to pressurize the cup and
deliver fluid to the tip/nozzle. When the paint flow screw is opened and the trigger pulled back, fluid flows through the tip/nozzle
mixing with the air flow delivered from the air cap and projects a fine atomized mist to your work piece. Spray pattern control will
vary depending on the spray gun model. Consult your individual spray gun manual for detailed operation and maintenance of your
spray gun.
(1) Blow-Off Tool
(1) Viscosity Cup
(3) Quick Couplers (2x Handi-Hold™)
(1) Wrench / Spanner
(1) Spray Gun Lube
(1) Instruction Manual
Page 5
(1x Hose Coupler)