4DRC 4D -V32 Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Drone 4DRC 4D -V32. 4DRC 4D -V32 16 halaman. Four axis aircraft
Halaman Cetak10.3 Horizontal calibration:
Long press the calibration button on the remote control
the aircraft will flash quickly. The calibration of the LED light on the aircraft is completed,
and the remote control emits a "beep" sound (Figure 1).
Note: The calibration must be completed by placing the aircraft on a horizontal
plane!
10.4 Start/Stop：
Push the left joystick on the remote control upwards (Figure 2), and the aircraft can
take off normally. After takeoff, all indicator lights of the aircraft remain on. During flight,
briefly press
key, the aircraft will stop flying (Figure 3).
Note: This function operation is only suitable for aircraft in a state of loss of control.
Under normal circumstances, it is recommended to use one click takeoff/one click
landing
key.
Figure 2
10.5 One click takeoff/landing:
After unlocking is completed, lightly press the "One Key Takeoff/Landing" function key
on the remote control
of about 1 meter, maintaining a stable flight at this altitude; When you lightly press this
function key again, the aircraft will automatically and slowly land on the ground.
Before takeoff, please follow the steps in the above sequence to operate
Warn
the aircraft using the remote control:Open
synchronization
Figure 1
(Figure 4), and the aircraft will automatically rise to an altitude
Horizontal calibration start/stop
Figure 4
-6-
, and the LED lights on
Figure 3
Remote control start frequency
One click takeoff/landing.