Appalachian Stove & Fabricators 36-BW Prosedur Instalasi dan Operasi - Halaman 7
Jelajahi secara online atau unduh pdf Prosedur Instalasi dan Operasi untuk Perapian Dalam Ruangan Appalachian Stove & Fabricators 36-BW. Appalachian Stove & Fabricators 36-BW 19 halaman. Fireplace insert - freestanding
Halaman Cetak
IV . FREESTANDING INSTALLATION
1. STOVE COMPONENTS
The following components are
included with the 36-BW
freestanding model:
A) Model 36-BW stove
B) Ash Pan
C) Firebrick Firebox Liner
D) Assembly Screws
E) Blower Assembly
F) Control Panel Assembly
G) Pedestal (Not Shown)
FIGURE 7
FREESTANDING STOVE COMPONENTS
2. PREPARATION
Proper preparation and planning of the installation will simplify the
process and help achieve effective operation of the unit.
A) Select the location for the stove installation. The stove should be
positioned so that the air flows to the rest of the home in the most direct
route possible.
B) Locate the approximate penetration point of the chimney structure.
Avoid roof areas such as valleys, ridges, dormers and hips.
Place the floor protector in position, if the installation is being made on a
combustible floor. (Section II)
Place the stove in position and check clearances. (Section II)
7