Acer AT2758ML Panduan Pengguna - Halaman 35

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk TV LCD Acer AT2758ML. Acer AT2758ML 39 halaman.

Troubleshooting

Before you call the Acer service center, please check the following items:

Here is a list of possible situations that may arise during the use of your LCD TV.

Easy answers and solutions are provided for each.

• Make sure the power cord is properly inserted in the power outlet.

• Make sure the input mode is correctly set by your selected input.

• Make sure the antenna at the rear of the TV is properly connected.

• Make sure the main power switch is turned on.

• Make sure the volume is not set to minimum or the sound is not set to

mute.

• Make sure the headphones are not connected.

• Reception other than those of broadcasting stations can be considered.

• Make sure the antenna cable is properly connected.

• Consider whether your TV signal is being properly received.

• Poor picture quality can occur due to a VHS camera, camcorder, or other

peripheral being connected at the same time. Switch off one of the

other peripherals.

• The 'ghost' or double image may be caused by obstruction to the

antenna due to high-rise buildings or hills. Using a highly directional

antenna may improve the picture quality.

• The horizontal dotted lines shown on the pictures may be caused by

electrical interference, e.g., hair dryer, nearby neon lights, etc. Turn off

or remove these.

• Check the colour adjustment.

• Check the brightness setting.

• Check the sharpness function.

• The fluorescent lamp may have reached the end of its service life.

• Check the batteries of the remote control.

• Make sure the remote sensor window is not under strong fluorescent

lighting.

• Try to clean the remote control sensor lens on the TV with a soft cloth.

• Use the buttons (hotkeys) on the TV before the remote control works.

If the above suggestions do not solve your technical issue, please refer to the

warranty card for service information.