DURKOPP ADLER 550-867 Petunjuk Tambahan - Halaman 9

Jelajahi secara online atau unduh pdf Petunjuk Tambahan untuk Mesin Jahit DURKOPP ADLER 550-867. DURKOPP ADLER 550-867 20 halaman. Btsr sensor

Replacing the thread tension PCB

Putting on the antistatic armband

1. Fasten the antistatic armband (2) to the mechanic's arm.

2. Fasten the clamp (3) of the antistatic armband (2) to equipotential

Abb. 6: Antistatic armband

Removing the PCB

1. Loosen all four screws (7) and remove the PCB (5).

2. Release the screws (6) on the plugs.

3. Pull off the plug (6).

Abb. 7: Removing the PCB

Additional Instructions 550-867 - 01.0 - 08/2017

bonding (4) on the control cabinet.

②

(2) - Antistatic armband

(3) - Clamp

⑤

⑥

(5) - PCB

(6) - Plug

④

(4) - Equipotential bonding

⑦

(7) - Screws

③

④

③

⑥