AddSecure Asset Series Panduan Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Aksesori Mobil AddSecure Asset Series. AddSecure Asset Series 14 halaman.
Halaman Cetak1 Mounting the unit
The Asset Light and Asset Light Pro units can be mounted on various places on the vehicle, but to
ensure best possible GPS and GSM signals, it must not be placed under metal. Plastic, fibreglass and
fabric will not affect the signals. The antenna is located at the end opposite the connector. Use the
supplied splash-proof mounting box.
Protect from sunlight and do not expose to temperatures under -20
o
C and above +45
o
C Celsius.
Important: Mount the supplied 1A splash-resistant auto fuse on the white wire to permanent supply.
Place the fuse as close to the power source as possible to protect the vehicle.
To obtain a water-proof installation, mount the supplied four locking devices.
Mount the unit on a suitable place where it is protected from water. Never clean the unit with a high-
pressure cleaner.
The wire output must face downwards.
When attaching the power-/multi connector to the unit, you have to hear a click sound to ensure, that
the connector is attached properly. Possibly you have to press it gently further into the connector with
a tool, until you can hear the click.
Up to 5 minutes may pass from power on till the unit is charged and ready for use.
1