DURKOPP ADLER 8967 Panduan Petunjuk Pengoperasian - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin Jahit DURKOPP ADLER 8967. DURKOPP ADLER 8967 15 halaman. Preface and general safety information
Juga untuk DURKOPP ADLER 8967: Panduan Instalasi (14 halaman)
Halaman Cetak
3.2 Winding the Bobbin Thread
12
–
Place the bobbin 4 on the bobbin winder 3.
–
Pull the thread through the guide 1 and the tension 2.
–
Wind the thread approx. 5 x clockwise around the
bobbin core and tear off at the thread clamp 6.
–
Press the bobbinr lever 5 into the bobbin.
–
Sewing
The bobbin winder lever stops the procedure when
the bobbin is full.
Attention !
If the thread is not to be wound during sewing, the
pressure foot must be arrested in the raised position and
the pressure foot stroke set at the smallest value.
6
1
2
3
4
5