DURKOPP ADLER 911 Panduan Petunjuk Pengoperasian & Pemasangan - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemasangan untuk Mesin Jahit DURKOPP ADLER 911. DURKOPP ADLER 911 18 halaman. Cnc-controlled sewing unit with large sewing area
Halaman Cetak
3.3 Setting the working height
3.3.1
Sewing units with rollers
1
6
The working height can be set between 760 mm and 910 mm
(measured up to the upper edge of the table top).
Caution: Risk of injury!
Do not lift the sewing unit using the table top.
Put a lifting cart or a forklift underneath the sewing unit before
loosening the clamping screw.
Set the height of the sewing unit by equally pulling the tubular feet of
the stand.
–
Loosen screws 1 (8x).
–
Set the table top to the desired height to be level.
To avoid a tilting, pull out / push in the tubular feet equally on both
sides.
–
Fasten screws 1.